Golf Glove Sample Revisions: Common Problems and How Manufacturers Resolve Them

At Texpak, the most common sample discussions involve sizing, colour and printing. A useful revision request identifies the part of the glove that needs changing and the result the brand wants to achieve.

We offer multiple sample revisions and prototyping without a sample-making charge, with the customer paying shipping. Revisions can take a similar amount of time to the initial one-to-two-week sample production, depending on what needs to change.

Fit changes start with a specific observation

If a glove feels too tight or loose, identify where. Palm width, finger length and the intended overall fit are more actionable than a general request to change the size.

Measurements and marked photographs help us understand the problem. The most helpful fit reference is often a physical glove the customer already likes, accompanied by an explanation of which aspects should guide the new sample.

Sizing changes require new pattern work. Review the revised glove before approving the alteration for the rest of the range. Our fit guide offers a structure for checking the result.

Review who the sample is meant to fit

An individual owner's preference can differ from the proportions needed by the brand's customers. Before changing a regional starting pattern, consider whether the feedback represents the target audience.

Look for consistent observations across the people assessing the intended range. If several suitable reviewers identify the same width issue, the pattern team has a clearer problem to address than a set of conflicting requests based on different size references.

Keep the sample identifier, fit range and labelled size with each set of feedback.

A leather colour change can require another leather batch

Changing leather colour involves more than adjusting a digital mockup. In our process, it can mean preparing leather again in the tannery.

Explain which physical sample and colour reference you are comparing. Separate a request to change the chosen colour from a question about the small natural variation that can occur between leather batches.

We retain master samples and assess leather against the agreed product requirements. Our leather-batch variation article explains that separate subject in more detail.

Printing and logo revisions need identified artwork

For a printing correction, mark the intended position, dimensions, orientation and colours. Send the correct artwork version and show how it should sit on the glove when the strap is closed.

Depending on the application, changing a logo may require a new die, mould or other tooling. Confirm that requirement for the actual decoration method rather than assuming every logo change follows the same process.

The logo artwork approval checklist explains the information to provide before making the revised sample.

Sometimes the material choice changes during sampling

Outgrip Australia initially approached Texpak for quality Cabretta gloves. We supplied the requested samples and included synthetic samples for comparison. The brand subsequently purchased both material options.

The comparison gave the customer a chance to assess another construction physically. A revision or development discussion can therefore concern which products belong in the range, as well as a correction to an existing design.

When the material changes, review a sample of the selected construction before closing the specification. Our Cabretta and synthetic guide can support that discussion.

Send one consolidated revision brief

For each revised sample, provide:

1. The sample identifier and artwork version being reviewed.
2. Measurements, marked photographs or a physical fit reference.
3. A separate description of each requested change.
4. Details already approved that should stay the same.
5. The person responsible for confirming the revised result.

A consolidated brief reduces the chance of one message referring to an earlier design while another refers to the latest sample. Keep the final approval with the agreed specification.

Use revisions to reach a clear production reference

Sample development is most useful when it ends with a glove both parties can identify and approve. Texpak labels customer samples and keeps master references in customer files.

Contact our manufacturing team with your concept or sample feedback. We can discuss which changes require pattern, material or artwork work before setting the next development stage.