Golf Glove Quality Control: What OEM Buyers Should Ask

Ask a manufacturer which quality checks it performs and what each check establishes. A leather strength result, a print-retention assessment and a stitching inspection answer different questions. Your product specification should make those questions clear before production.

Quality starts with a clear product reference

Before discussing pass or fail, identify the glove being assessed. Keep the agreed material description, design, size range, wearing hands, artwork revision and sample reference together. Otherwise, two people may judge different versions of the product against an undefined idea of quality.

A sample review is a useful opportunity to resolve both appearance and fit. Record the changes requested and check the revision before treating it as the reference for the next stage.

Texpak tests patterns and sends custom gloves to brands before production. Materials, colors, printing, trims and packaging can be discussed as part of that process. Our OEM brief guide explains how to organize the starting information.

Is tensile strength the same as tear strength?

No. They are different measurements. ISO’s public descriptions distinguish ISO 3376:2020, covering leather tensile strength and elongation, from ISO 3377-2:2025, covering double-edge tear load. A result for one should not be relabeled as the other.

These references illustrate the distinction between test types. They are not a claim that Texpak uses those particular methods or holds an ISO certification. Ask which method applies to a specific test result rather than making an assumption from the phrase “strength tested.”

Texpak includes leather tensile strength among its checks. If your brief also requires a tear result, define that separately. Ask which material was assessed, how the sample relates to the proposed glove, which method was used and what the result means for the agreed requirement.

A leather test result also should not be converted into a promise that a finished glove will last a fixed number of rounds. Fit, construction and use raise further questions. A material assessment is valuable when its scope is kept clear.

What should an OEM buyer ask about print retention?

First distinguish print appearance from retention. A new sample can look sharp and still leave a separate question about how the decoration behaves under the conditions being assessed.

Texpak carries out print retention checks. For your project, ask what method and acceptance criteria apply, whether the intended material and decoration are represented, and what will be recorded if the result needs discussion.

• Identify the artwork revision and printed material.
• Agree the conditions and assessment method relevant to the requirement.
• Describe the acceptable result in terms both sides understand.
• Keep the result and sample reference together.
• Review any changed material or decoration before reusing an earlier conclusion.

This checklist proposes questions, not a test protocol or a claimed number of successful cycles. The method needs to be agreed for the product and the claim you want to support.

Our custom logo approval guide covers the preceding artwork and visual-review stage.

Check construction throughout the process

Texpak checks stitching during production and again before gloves are packed for shipping. A buyer can make that discussion more useful by identifying which construction details are particularly important to the approved design.

Ask how concerns such as a loose seam, a missing stitch or an uncomfortable area should be described and reviewed. Use clear photographs and an identified sample so a correction can be traced to the right style and revision.

Fit should remain visible in this conversation. A glove may meet the appearance brief while feeling wrong at the thumb or fingers. Review the glove on a hand and holding a grip, then describe the location of any issue. Our fit guide gives a practical structure for those observations.

Texpak owns a tannery and prepares leather from raw hides before cutting and stitching gloves in-house. That connects several production stages, but buyers should still ask about the particular checks and specification for their project.

What should the quality record contain?

The appropriate record depends on the project. Discuss what your brand needs before assuming a supplier’s standard checks answer a particular retail claim.

A good quality conversation replaces vague adjectives with specific questions. It also makes later decisions easier: if a material or print changes, you can see which earlier reviews need to be revisited.